Dear [Cement Mixer] Customer, Hello! You are the 13226th visitor to Jinboda Corporation! Since its establishment in 2009, Jinboda has been committed to the technical research and development and experience accumulation in the field of machinery industry, and has provided hundreds of customers with good quality [cement mixers] products!
Cement Mixer Overview:
In recent years, with the continuous development of building material technology, new technologies in the building material industry have continuously emerged. As a technical highlight of the cement industry, slag high-fine powder has attracted the attention of the entire industry. Due to its deep potential development, it is rapidly changing the original grinding process. Technologies such as the compounding of high fine powder in cement, blending process of clinker powder and high fine powder came into being. The new process must be guaranteed by new technical equipment, so various cement mixers have begun to appear.
The existing cement mixers are mainly mechanical and pneumatic. Mechanical mixers are divided into two types: single shaft and double shaft. The characteristics of the mechanical mixer are that the mixture is relatively uniform and reliable, but the power consumption is large, the parts are worn seriously, and the unit consumption of the mixture is large. In addition, special process layout is required; pneumatic mixers have airflow and gasification mixers. The characteristics are: fast mixing, low power consumption, and low consumption of parts and components, but the disadvantage is that the material is affected by short circuit of gas, eddy current side wall effect and so on. The uniformity of the mixture is low, and a special process layout is also required. Therefore, the existing mixers have exposed their limitations in actual production.
Our company's newly developed cement pneumatic and mechanical compound mixer is developed based on the advantages of mechanical and pneumatic mixers. It not only has the characteristics of uniform mixing of mechanical mixers, but also pneumatic mixers. The feeder has the advantages of fast mixing, low power consumption and small parts consumption. In particular, no special process route is required in terms of process layout, and only a slight improvement in the bypass of the conveying equipment can be used for installation. After being used by many cement companies, it has been well received by users.
Features of cement mixer:
1. The mixture is even and reliable. The overflow structure is adopted, and the amount of online mixing is large.
2. Low power consumption, energy consumption per cubic powder is less than 0.16kwh. (See Table 1)
3. Equipment wear is small, no need to exchange wearing parts within one year.
4. Simple process layout, no special process circuit is required (see Figure 1)
5. Large mixing volume, 50-500m³ / h.
6, can effectively remove large particles in the powder.
7, good homogenization effect, standard deviation S ≤ 1.2%.
The requirements of the cement mixer on the materials to be mixed:
1. Must be powdery material with fineness below 15%.
2. The moisture is less than 1.5%.
3. The capacity is below 2 * 10³kg / m³.
4. No viscosity.
5. Accurate feeding measurement.
Working principle of cement mixer:
The bottom of the mixing tank equipped with a stirring shaft and a blade is equipped with a gas-filled tank. After the high-pressure air is blown in by the Roots blower and the material enters the mixing box, it is first fluidized by the gasification of the filling box at the bottom of the mixing box, and then aerated and stirred by the action of the blade of the stirring shaft in the mixing box. The mouth is at the upper part of the mixing box, and the stirred material overflows from the discharge port. The materials below the discharge port are then stirred with the subsequent materials entering the mixing box and then overflow through the discharge port. Because the material in the mixing box is fully fluidized, and the material overflow structure, large particles of the material will be deposited on the bottom of the mixing box. When the mixer needs to be stopped for a certain period of time, it should be removed from the slag removal port on the lower part of the side of the mixing box.
Cement mixer parameters:
| model |
FH500 * 3500
FH630 * 3500
FH800 * 4000
FH500 * 3500-2
FH630 * 3500-2
FH800 * 4000-2
Mixing capacity m3 / h
Shaft power KW
2 * 2.2
2 * 3
2 * 5.5
Fan power KW
Total power KW
Experience Jinboda Environmental Protection's Three Guarantees Policy Support
After Jinboda environmental protection brand cement mixer exceeds the manufacturer's three guarantee service period, Jinboda environmental protection will continue to provide you with aftermarket services in accordance with the three guarantee standards , including technical consulting, on-site service and genuine parts preferential policies below the market price .
Feel Jinboda Environmental Protection's immediate after-sales service
The service team provides uninterrupted service throughout the year and implements the service principle of 365 × 7 × 24
24-hour service hotline  is waiting for you ;
All you need is a call and promise to respond in 15 minutes
Down-to-earth and carry forward the spirit of Chinese artisans! Work hard and build Jinboda national brand! Thank you for your interest in the product information of Cement Mixer on Jinboda Environmental Protection Website, and you are also welcome to put forward your valuable opinions to jointly promote the international competitiveness of Made in China! 】，金博达愿与您携手共同实现中国梦！ If you have any questions about Jinboda cement mixer, please call Jinboda technical engineer: [ 13653855098 ], Jinboda is willing to work with you to realize the Chinese dream together!